NMEI

     

Products

 
NMEI
WIRE CUT SHOTS MACHINE



 

Wire cut Shots can be made from different kind of materials Like, Stainless Steels, Carbon steel of various hardness levels, Aluminum and Zinc. Size of media is not limited to the standards: As cut, Normal, double and Special..

 


 


As-cut particles are an effective abrasive due to the sharp edges created in the cutting process.
 

 
  • Versatility - One of the most important aspects of CUT WIRE SHOTS MACHINES is most
  • Economical and profit making machine.
  • Easy operational, unskilled labour can run the machine.
  • Very minimum operational cost.
  • Only low power is required.
  • You can make various sizes in one machine is its advantage.
  • Very low floor space is required.
  • Very minimum maintenance cost .
     
 

 

Advantages of steel shots with cut wire steel shots

 STEEL SHOTS (balls)  CUT WIRE STEEL SHOTS

For steel shots, raw material is steel scrap of unknown approximate comparison

Wire rod in steel mill is made from exact composition

Lot of melting 5-10 tons max.

200 to 500 ton melt for wire rod mill for making 6 ml. Rod

Grain size of cast shots 1-5

Due to eight rolling passes grain size 7.9.

Blow Holes & Trails

No Blow Holes & Trails

Shots produced are of mixed size hence product is a mix. Of various spherical sizes

All shots being out of same wire are identical

As quenching of steel globules is from 1600’c shrinkage and porosity unavailable. Hence density max. 7

No porosity-shrinkage hence 7.85

Material remove by impact only

Cylindrical edges scrape material faster

Shots break in to dust

SHOTS ONLY WEAR DOWN

Abrasive dust produced from shots increase shot blasting machine maintenances

Lower maintenances of machine due to absence of ABRASIVE DUST

Steel dust also in dept’s atmosphere

No steel shot dust Generated

{Advantage} lower purchase price

Higher purchase price


 





 

Site By : g-net solutions